DENSO 10PA17C air AC compressor for Mercedes benz with PV8 CLUTCH/Pulley 0002300111 0002300211 INTL-XZC507 manufacturer from China INTERNATIONAL AUTO PARTS (GUANGZHOU) LIMITED

DENSO 10PA17C air AC compressor for Mercedes benz with PV8 CLUTCH/Pulley 0002300111 0002300211

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: INTL-XZC507

Brand Name: INTL

Model number: INTL-XZC507
Car name: Mercedes benz
Year model:
Compressor Type:10PA17C
Grooves: PV8
Volt: 12V
Clutch DIA: 124mm

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.

10PA17C Mercedes benz compressor brand new

Specification:

Model number: INTL-XZC507

Car name: Mercedes benz

Year model:

Compressor Type:10PA17C

Grooves: PV8

Volt: 12V

Clutch DIA: 124mm

Special Notes:

OEM:

0002300111

0002300211

Used for:

1990-1991 Mercedes-Benz 300SL

1992-1993 Mercedes-Benz 400E 500E

1993 Mercedes-Benz 400SEL 600SL

1994-1995 Mercedes-Benz E420 SL600

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced